+90 533 762 3815

contact@fytronix.com

SOLAR SIMULATOR

  • Product Code: SOLAR_SIMULATOR_001
  • Availability: In Stock
0.00TL
This system analyze all photovoltaic and photoconducting characteristics of all solar cells such Dye sensitized solar cell, quantum dots solar cells, Organic solar Cells, Silicon Solar cells, Thin films solar Cells under various solar light intensities from 0.1 W/cm2 to 1500 W/m2.

FYTRONIX 7000 SOLAR SIMULATOR SYSTEM measures the followings

Solar Simulator system is controlled automatically by computer 

Solar Simulator system adjusts manually or automatically (optional) the intensity of light 0.1 W/m2 -1500 W /m2 

Solar Simulator system measures manually or automatically (optional) current-voltage (I-V)  and current-time (I-t) characteristics of Schottky diode, pn junction , photodiode and photodetector and so on.

Solar Simulator system measure manually or automatically (optional)  current-voltage (I-V)  and current-time (I-t) characteristics of Schottky diode, pn junction , photodiode and photodetector under various wavelengths (optional).

Solar Simulator system measures manually or automatically (optional) current-voltage (I-V) and current-time (I-t) characteristics of Solar Cells, Schottky diode, pn junction , photodiode and photodetector under various wavelengths and intensities (optional).

Solar Simulator system analyzes manually or automatically (optional) photovoltaic mechanism or photoconducting mechanism of solar cells a, photodiode and photodetectors.

Solar Simulator system measures manually or automatically (optional) photosensitivity, photoresponsivity, band width, detectivity and quantum efficiency parameters of the solar cells and photodetectors.

 

After-sales of the system, the following trainings will be given 

Dye sensitized solar cell preparation and characterization
Quantum dots solar cell preparation and characterization
Organic solar cell preparation and characterization
Silicon solar cell preparation and characterization
Schott preparation and characterization of the diodes
PN junction diode preparation and characterization
Preparation and characterization of MIS diode
To teach the calculation of all electronic parameters

 

 

 

TECHNICAL SPECIFICATIONS OF FULL AUTOMATIC SOLAR IV CHARACTERIZATION SYSTEM 

  1. 1. Solar Simulator system should automatically controlled by computer.
  2. 2. Solar Simulator system should measure manually or automatically (optional)  I-V characteristics from 1 W/cm2 -1500 W /cm2 by adjusting light intensity with step of 1 mW/cm2.
  3. 3. Solar simulator system should simultaneously measure I-V and current (I-) characteristics curve of the device, Solar Cell I-V characteristic curve, Power-voltage curve, lsc-Solar light intensity curve and photovoltaic mechanism curve. System analyzes the photovoltaic mechanism and write type of the mechanism on computer screen (optional). 
  4. 4. Solar Simulator should manually or automatically (optional)  measure open circuit voltage Voc and short circuit current, ISC , Shunt resistance (Rsh) • Conversion efficiency (n), Maximum power output (Pmax), Voltage at Pmax (Vmax), characteristic resistance, Rch ,  Fill factor (FF) • Series resistance (Rs)
  5. 5. Solar Simulator system measures automatically short circuit current, Isc-time (Isc-t) characteristics of the solar cell.
  6. 6. System should automatically measure transient photocurrent measurements under solar light from 1 mW/cm2 to 100 mW2 with step of 1 mW/cm2.
  7. 7. Solar Simulator system should manually or automatically (optional) analyze photovoltaic mechanism of solar cells a, photodiode and photodetectors with photodetector parameters.
  8. 8. System should have a source meter having the specifications

Voltage range: -10 V to +10 V

Current range: 100 p;A  to 1A 

  1. 9. System should have an  automatic shuttering system which manually or automatically (optional)  changes solar light from 20 m/cm2 to 100 mW2
  2. 10. System should have sample holder and it is comprised of two probes. Holder size should have 132.5mmx132.5mm.
  3. 11. System should have software to control measurements and analysis of data. 
  4. 12. Installing and training

SOFTWARE OF THE SYSTEM

System has two software, first characterize all photovoltaic parameters

Software measure all photovoltaic parameters of solar cells by computer. The system determine all photovoltaic parameters. Software of Solar Simulator system determine the following photovoltaic parameters such as short circuit current Isc, open circuit voltage Voc, maximum power Pmax, maximum current Imax, maximum voltage Vmax, efficiency , shunt resistance Rsh and series resistance Rs.

Also, the system analyze the automatically the photovoltaic mechanism analysis. 

 

Updating...

Copyright © Süper Bilişim 2009 - 2019 All rights reserved.