× TRIBOMETER AAA CLASS LED SOLAR SIMULATOR 9830 EPD COATING SYSTEM PHOTORESPONSE SYSTEM SOLAR PANEL SOLAR SIMULATOR ELECTROSPINNING SYSTEM ESP 9300 AAA CLASS SOLAR SIMULATOR FYTRONIX-9860 XENON LIGHT SOURCE CYCLIC VOLTAMETRY ELECTRODES 9000-HOT PRESS 9000-HOT PRESS 2 PHOTOCONDUCTIVITY – TIME MEASUREMENT SYSTEM LED QUANTUM EFFICIENCY SYSTEM FY-MGSP-3 2 RF + 1 DC MAGNETRON SPUTTERING SYSTEM FYT-T1800 1800C HIGH TEMPERATURE TUBE FURNACE UV CURABLE EPD COATING SYSTEM ULTRASONIC SPRAY COATING SYSTEM ULTRASONIC SONICATOR SPARK PLASMA SYSTEM SOL GEL THIN FILM COATER SILAR QUANTUM DOTS COATER REFERENCE SOLAR CELL CERTIFICATE REFERECE SOLAR CELL QUANTUM EFFICIENCY SYSTEM PHOTORESPONSE AND PHOTOCAPACITANCE ANALYZER PHOTOCHEMICAL SYSTEM PHOTOCATALYSIS SYSTEM PHOTOCATALYSIS SOLAR SIMULATOR OPTICAL CONSTANTS CHARACTERIATION SYSTEM OLED CHARACTERIZATION SYSTEM OFET CHARACTERIZATION SYSTEM FULL AUTOMATIC SOLAR SIMULATOR MICROMETER ADJUSTABLE THIN FILM COATER DOCTOR BLADE MARKSTRONIC AAA CLASS LED SOLAR SIMULATOR MAGNETIC FIELD ASSISTED ELECTROSPINNING IMPEDANCE ANALYZER LCR METER IMPEDANCE ANALYZER HIGH PRESSURE REACTOR SYSTEM HALL EFFECT MEASUREMENT SYSTEM GLOVEBOX SYSTEM GAS SENSOR MEASUREMENT SYSTEM UV DEZENFEKTE CİHAZI SPIN COATER HYDROTHERMAL SYSTEM EPD COATING SYSTEM ELECTROSPINNING SYSTEM 9800 AAA CLASS SOLAR SIMULATOR 9600 AAA CLASS SOLAR SIMULATOR FULL AUTOMATIC SOLAR IV – IMPEDANCE ANALYZER SYSTEM FOUR PROBE CONDUCTIVITY METER FOUR POINT PROBE RESISTANCE SYSTEM ELEKTROSPINNING MACHINE ELECTROSPINNING MACHINE/NANOFIBER ELECTROPHORETIC DEPOSITION (EPD) ELECTRICAL CONDUCTIVITY SYSTEM DYE SENSITIZED SOLAR CELL HOLDER DIP COATER DIELECTRIC MEASUREMENT SYSTEM DIELECTRIC ANALYZER CURRENT AND VOLTAGE MODULATED SYSTEM CONTACT ANGLE TESTER CHEMOTHERAPY OF CANCER 9000 CHEMICAL BATH DEPOSITION CAPACITANCE-VOLTAGE ANALYZER BATTERY CHARGE - DISCHARGE ANALZYER AGATE MORTAR FOR GRINDING AAA CLASS SOLAR SIMULATOR IV CHARATERIZATION SYSTEM 9900 AAA CLASS LED SOLAR SIMULATOR 9800 300 W AAA CLASS SOLAR SIMULATOR 300 W-80 AAA CLASS SOLAR SIMULATOR 300 W-50 AAA CLASS SOLAR SIMULATOR ELEKTROSPINNING NANOFIBER SPIN COATERS - PHOTOLITHOGRAPHY SPIN COATER SOURCE MEASURE UNIT SYSTEM I-V MEASURE SOURCE METER IV AND CV ANALYZER SOLAR SIMULATOR- AAA CLASS SOLAR SIMULATOR SOLAR SIMULATOR AAA CLASS CRYOSTAT ULTRASONIC CLEANING BATH THIN FILM TRANSISTOR CHARACTERIZATION SYSTEM ULTRASONIC SONICATOR 2 HYDROTHERMAL REACTOR/HIGH PRESSURE REACTOR HIGH VOLTAGE POWER SUPPLY HYDROTHERMAL SYSTEM HIGH TEMPERATURE FURNACE FOUR POINT PROBE SCS SEMICONDUCTOR CHARACTERIZATION SYSTEM ELECTRICAL CONDUCTIVITY ANALYZER OPEN SYSTEM NITROGEN CRYOSTAT DC GÜÇ KAYNAĞI 12V/8A THERMAL EVAPORATION AND MAGNETRON SPUTTER SYSTEM WITH OPTIONAL GLOVEBOX INTEGRATION THERMAL ANALYSIS CRUCIBLE CERAMIC ITCH METTLER ALUMINA/TG/DIFFERENTIAL HEAT DSC TGA/DTA
  • Solar Simulator AAA Class

SOLAR IV CHARACTERIZATION SYSTEM includes

SOLAR SIMULATOR

I-V CHARACTERIZATION SYSTEM, SOURCEMETER

SAMPLE HOLDER

CONNECTIONS

 

SOFTWAREs

Solar IV characterization Software

Solar Phototransient Current Software

  

SPECIFICATIONS

FYTRONIX solar simulators use a single lamp design to meet Class A requirements with 1 SUN output power. FYTRONIX solar simulators are certified to Class AAA for all three of the following standards:

Class: AAA IEC 60904-9 Edition 2 (2007), JIS 8904-9 (2017), and ASTM E927-10 (2015).

• Spectral match: Class A

• Spatial non-uniformity of irradiance, Class A

• Temporal instability, Class A

• Illuminance area: 40 mm diameter

• Variable intensity for 1mW/cm2 to 1000 W(m2 (1 SUN) output

 

 

 

Light source: Plasma light

Advantages  to Xenon lamp and other light sources  are

The life of plasma lamp (4000-5000h)  is longer than Xenon lamp (1000-1500h.

 The output of Plasma lamp is smooth than Xenon lamp.

The intensity of plasma based solar simulator can be controlled from 1 mw/cm2 to 100 mw/cm2 with 1 step But the intensity of Xenon lamp  based on solar simulator can not controlled from 1 mw/cm2 to 100 mw/cm2 with 1 step

The intensity of solar light is  controlled by computer (USB communication) . The intensity of the solar simulator is automatically controlled by computer from 1 mw/cm2 to 100 mw/cm2 with 1 step or any step.

Includes Class AAA calibration certificate for IEC, ASTM and JIS

 

Sourcemeter

Solarphys Tech

Voltage range: -20 V to +20 V

Voltage resolution: 0.001 V

Current range:  50 pA to 250 mA

 

-Sample Holder

Connection probes: two probe connection

- Calibrated Reference solar cell to calibrate output to 1 SUN

 

Factory calibrated AM1.5G spectral match

Factory calibrated intensity

 Calibration bands:  6 bands (400-500nm, 500-600nm, 600-700nm, 700-800nm, 900-1000, 1000- 1100 nm which meets Class AAA specification for IEC 60904-9, JIS C 8912, and ASTM E 927-05 standards.

 

Easy automatically light adjustment

 

Can be mounted pointing up, down, or to the side with 90o rotational accessory Temperature controlled for stable output

Software

I-V measurements

P-V measurements

lnI-V measurements

Isc-P (irradiance) measurements

lnIsc vs lnP to analyze photovoltaic mechanism

Sample Holder

 

 

 

Solar Cell I-V Characterization System

This system analyze all photovoltaic and photoconducting characteristics of all solar cells such Dye sensitized solar cells, Quantum dots solar cells, Organic solar Cells, Perovskite Solar Cells, Solar Silicon Solar cells, Thin films solar Cells under 1000 W/m2.

This system is a complete current-voltage (I-V) and power-voltage (P-V) measurement environment.

 

 

 

 

 

 

 

SOLAR SIMULATOR SYSTEM

•           Solar simulator has 7 inch touch screen of the device.

•           Solar spectral spectrum is observed on the screen of the solar simulator controller when the measurement is performed.

•           The solar simulator has  2 inch 90 degree light guide and the light is turned 360 degrees to the desired direction.

•           The illumination area of the device is circular with a diameter of 4

 cm.

•          

 

SOURCEMETER

•           The sourcemeter must have a sourcemeter. The sourcemeter have an automatic current range and the current range should be in the range  50pA-250 mA.

•           The voltage range of the sourcemeter is ranging from  -20 V to +20 V.

•           The intensity of solar simulator is 1000 W/m2,0-1 SUN

•           The solar simulator measures the IV characteristics of all solar cells (Dye sensitized solar cell, perovskite Solar Cells, Quantum dots solar cells, Organic solar cell, Silicon solar cells) and be able to perform the IV characteristics of the batteries under computer control.

•           The solar simulator measures the current-voltage characteristics of the solar cell under 1

•           The current-voltage (I-V) characteristics of the solar cell are measured with the software in the system. The solar cell's open circuit voltage Voc, short circuit current Isc, filling factor FF, maximum current Imax, maximum power Pmax and efficiency η, series resistance Rs, shunt resistance Rp and characteristic resistance Rch should be measured automatically. •

•           A reference solar cell should be given with the solar simulator.

•           The probe holder of the device should be measured in a way that the measurements of the solar cell

 

 

SPECIFICATIONS OF SOLAR SIMULATOR SYSTEM

The device comply with the ASTM E 927-05 for uniformity classification, temporal stability and spectral match

Light illumination intensity range is adjustable 1000 W / m2

Device is automatically measure;

a.         open circuit voltage (Voc)

b.         short circuit current (Isc)

c.         fill factor (FF)

d.         voltage at Pmax (Vmax)

e.         current at Pmax (Imax)

f.          maximum output power (Pmax)

g.         shunt resistance (Rsh)

h.         series resistance (Rs)

i.          solar cell characteristics resistance (Rch)

j.          photoresponse (RR)

k.         solar cell efficiency (n)

Solar Simulator AAA Class

  • Product Code: SOLAR_SIMULATOR_LSS_9000
  • Availability: In Stock
  • 0.00TL



Copyright © Süper Bilişim 2009 - 2024 All rights reserved.