AAA CLASS SOLAR SIMULATOR FYTRONIX-9800

Solar  simulators are manufactured in various style according to requested specifications

Solar simulator is used  for current-voltage (I-V) characteristic measurements is used Solar simulator for power-voltage (P-V) of solar cells measurements

FYTRONIX solar simulator  is manufactured in accordance with IEC 60904-9 2007, ASTM E 72-10, , JIS C 891 standards. 

Solar simulators are manufactured in various style according to requested specifications

Solar simulator for current-voltage (I-V) characteristic measurements 

Solar simulator for power-voltage (P-V) of solar cells measurements

FYTRONIX solar simulator is manufactured in accordance with IEC 60904-9 2007, JIS C 891 standards. 

SPECIFICATIONS

Class: AAA 

Light source: 450W Xe lamp with optical reflector

Stability better than 1%

Cooling system: Fan cooling system with power-off-delay function

Light directions: Horizontal or various directions

Optical Shutter

Beam size: 100mm x 100mm

Compliance to IEC 60904-9 and ASTM standards Spectrum grade: A+; AM1.5G, typical <12.5% (<±25% 

comply with Class-A standard) Non-uniformity grade: A; <2%

Stability grade: A+; <1%

Solar Irradiance intensity: AM1.5G, 1000W-1200W/m2 @ 

Compatible with Keithley 2400 or 2450 source meter 

System measure: IV and P-V characteristics

Photovoltaic testing parameter:Jsc, Voc, Pmax, Vmax, Imax, FF, Rs, Rsh

Delay Time Measurement

Light Intensity Change

Continuous Intensity Adjustment, 1% resolution

Computer and monitor

Reference Solar cell: 

1. 90 x 70 x 17mm 2. Materials: mono-Si

3. Active area: 20mm x 20mm 4. KG3 filter

5. Sensor: Pt100 (4 wire)

6. Current: < 200mA (4 wire)

7. Lemon connector x 2 (Female)

8. Cable with 4C and male lemon connectors x 2

9. ISO 17025 certified NREL-traceable calibration report

 SOFTWARE  

Software is compatible for Keithley 2400 and 2450 Sourcemeter. 

Software measure all photovoltaic parameters of solar cells by computer. The system determine all 

photovoltaic parameters. software of solar simulator system determine the following photovoltaic 

parameters such as solar simulator automatically determine the photovoltaic parameters as follows

Open circuit voltage (voc) 

Short circuit current (isc) 

Fill factor (ff)

Voltage at pmax (vmax) 

Current at pmax (imax) 

Maximum power output (pmax) 

Shunt resistance (rsh) •

Series resistance (rs) •

Characteristic resistance of solar cell (rch) • 

Photoreponse (RR)

Solar cell efficiency (n)